SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
7
Purpose of this documentation
This document describes the PSU8600 TIA Portal Block Library. The block library provides
tested code with clearly defined interfaces. You can use it as the basis for the task you wish
to realize.
The main focus of this document is to describe:
● All blocks pertaining to the block library
● The functionality implemented through these blocks
The documentation furthermore illustrates the possible applications of the library, and step-
by-step instructions to help you integrate the library into your SIMATIC STEP 7 project.
Note
In this document, the function blocks for
S7-1200/1500 are described. Any deviations in the
-300/400 will be pointed out where applicable.
Note
Difference between TIA V14 SP1, TIA V15 and TIA V15.1
In this document, working with function blocks in TIA V14 SP1, TIA V15 an
described keeping TIA V15.1 Portal as reference. To work with TIA V14 SP1 you need to
import library package "PSU8600_Library_V14_SP1_V2
-4" block library, to work with TIA
V15 you need to open library package "PSU8600_Library_V15_V2
work with TIA V15.1 you need to open library package "PSU8600_Library_V15
For more information on SITOP manuals and documentation, refer to the following links:
● Siemens Industry Online Support (https://support.industry.siemens.com
)
● SITOP PSU8600: Faceplates and Communication Bocks (TIA Portal, STEP 7 and
WinCC) (https://support.industry.siemens.com/cs/ww/en/view/102379345
)
● SITOP PSU8600 Power Supply System Manual: Basic devices with four outputs
(https://support.industry.siemens.com/cs/ww/en/view/105867947
)
● SITOP PSU8600 Power Supply System Manual: Basic devices with one output
(https://support.industry.siemens.com/cs/ww/en/view/109482936
)