Siemens SITOP series - Creating a Connection to the Data Block for Global Data Exchange

Working with the library
7.3 WinCC Comfort/Advanced
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
116 Function Manual, 11.2018, A5E37763954-09-76
7.3.2
Creating a connection to the data block for global data exchange
Procedure
Follow these steps to create a connection to the data block for global data exchange:
Table 7- 6
Step number
Instruction
1
In the "Project tree", open "HMI tags" folder.
2 Add a new tag table.
3 Select required connection for the controller and the operator panel.