Siemens SITOP series - FB Sitop_Psu8600_Mainunit

SIMATIC STEP 7 function blocks
5.6 FB SITOP_PSU8600_MainUnit
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
31
5.6
FB SITOP_PSU8600_MainUnit
Function principle
The block reads the main module specific data from the global DB for data exchange and
supplies it at its output parameters.
On request, the block writes main module specific data first into the Cyclic Output Memory
area (if address is provided) and then into the PSU8600 device.
Block Diagram
Figure 5-11