Siemens SITOP series - Page 113

Working with the library
7.3 WinCC Comfort/Advanced
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
113
Inserting faceplates
Follow these steps to insert faceplates:
Table 7- 5
Step number
Instruction
1
In the "Project tree", open the project into which you want to insert the faceplate.
2 Open the "Screens" folder and add a new screen to your project.