Siemens SITOP series - Page 123

Working with the library
7.3 WinCC Comfort/Advanced
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
123
Configuring the alarms display
Follow these steps to configure the alarm display:
Table 7- 9
Step number
Instruction
1 In the "Libraries" window, navigate to
"Global libraries > PSU8600_Library_V15-1_V2-4 > Master copies >
PSU8600 WinCC > Screens > Comfort Panel/Advanced".
2 Select the "Alarm_windows" screen.