Siemens SITOP series - Page 43

SIMATIC STEP 7 function blocks
5.8 FB SITOP_PSU8600_S/SITOP_PSU8600_S1
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
43
Input parameters
Table 5- 24
Parameter
Data type
Description
HW_Ident_Head
HW_IO Start address of the entire main module.
(Reference, system tag: PSU_1 refers to the already
assigned PROFINET device name of the PSU main
module)
Cyclic_IO_HeadModule_
address
HW_IO Address of main module IO data submodule.
(Reference, system tag: <PSU Device
Name>~PSU8600_IO_Data_submodule. For example:
PSU_1~PSU8600_IO_Data_submodule)
Cyclic_IO_Output1_address
HW_IO Start address of main module output channel 1.
(Reference, system tag: Output_1 For example:
PSU_1~Output_1)
Device_name_PSU8600
String Device names of SITOP PSU8600. (String with maxi-
mum of 30 characters, enter PSU name to be displayed
in the HMI in plain text. For example: PSU8600)
Note
For S7-300/400
For addressing data type HW_IO, refer to the section
Data type HW_IO (Page 20).