Siemens SITOP series - Page 47

SIMATIC STEP 7 function blocks
5.9 FB SITOP_BUF8600_S
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
Function Manual, 11.2018, A5E37763954-09-76
47
Output parameters
Table 5- 28
Parameter
Data type
Description
Buffer_Out_Param
UDT_BUF8600_S_OUT
Structure of BUF8600 4 s/10 s output parameters
Structure of UDT_BUF8600_S_OUT
Table 5- 29
Parameter
Data type
Description
Operating_state
Byte
Operating state of the buffer module
Charging_state
Byte
Amount of charge remaining in the buffer module (0 to 100 %)
Buf_disabled_by_input
Byte Buffering disabled by inputs (0 = no, 255 = yes)