Siemens SITOP series - Page 92

WinCC Faceplates
6.5 View: State, buffer modules
SITOP PSU8600 Firmware V1.4: Faceplates and Communication Blocks V2.4 for SIMATIC STEP 7 V14 SP1, V15 and V15.1 (TIA)
92 Function Manual, 11.2018, A5E37763954-09-76
Elements
Table 6- 9
Screen area
Parameter
Description
BUF8600
information
Operating state
and <Text field>
The operating state displays various colors depending on the
state of BUF8600.
The <text field> displays the operating state as plain text.
Text
Number
Color
Off
0
Grey
Startup
1
Grey
Normal operation
2
Green
Buffer mode
3
Yellow
Shutdown after error
4
Red
The power supply system can be
reactivated again after automatic
shutdown due to an error by
switching the supply voltage off
and on.
5 Red, flashing
Ready for buffering
6
Green, flashing
Not ready for buffering
7
Green, flashing
Buffer component disabled
8
Red, flashing
Firmware update
9
Red
End of buffering 10 Red/Green alter-
nating flashing
Charge status
Amount of charge capacity remaining in the buffer module.