Siemens SITRANS F M MAG 5000 CT - Changing the Password

Commissioning
6.7 Changing language
SITRANS F M MAG 5000/6000
Operating Instructions, 01/2010, SFIDK.PS.026.G1.02
43
6.7 Changing language
It is possible to change language in transmitter. Default language is English, but it can be
changed to various other languages.
Change language as follows:
1. Press top up key
for 2 sec.
2. Enter password.
3. Use forward key
or backward key to reach language menu.
4. Press lock/unlock key
to unlock language.
5. Use change key
to select desired language.
6. Press lock/unlock key
to confirm new language.
7. Press top up key
two times to exit setup mode.
See language mode diagram (Page 79)