Siemens SITRANS F M MAG 5000 CT - Sensor Characteristics

Functions
8.3 Sensor characteristics
SITRANS F M MAG 5000/6000
Operating Instructions, 01/2010, SFIDK.PS.026.G1.02
51
See external input menu diagram (Page 83).
Note
Batch settings
Only MAG 6000.
Not available in MAG 5000, MAG 5000 CT and MAG 6000 CT.
Note
Manual cleaning
If the digital input is used for manual cleaning, the relay output also automatically changes to
"cleaning".
8.3 Sensor characteristics
The sensor characteristics menu shows:
● If a SENSORPROM
®
is installed or not.
● Suppress error P 40 (SENSORPROM
®
not installed)
● Sensor size.
● Calibration factor.
● Correction factor.
● Excitation.
See also sensor characteristics menu diagram (Page 84).