Siemens SITRANS F M MAG 5000 CT - Service and Maintenance; Transmitter Check List

Alarm, error, and system messages
9.2 List of error numbers
SITRANS F M MAG 5000/6000
58 Operating Instructions, 01/2010, SFIDK.PS.026.G1.02
Error
No.
Error text
Remedy text
Comment Output
status
Input
status
42 P42 - Current output
Check cables Current loop is disconnected or the loop resistance
is too big
Active Active
43 P43 - Internal error
Switch off and on Too many errors occurred at the same time.
Some errors are not detected correctly
Active Active
44 P44 - CT SENSORPROM®
SENSORPROM
®
unit has been used as CT version Active Active
60 F60 - CAN comm. error
Transmitter/AOM CAN bus communication error. An add-on module,
the display module or the transmitter is defective
Zero Inactiv
e
61 F60 - SENSORPROM® error
Replace It is not possible to rely on the data in
SENSORPROM
®
unit anymore
Active Active
62 F62 - SENSORPROM® ID
Replace The SENSORPROM
®
unit ID does not comply with
the product ID.
The SENSORPROM
®
unit is from another type of
product SITRANS F C, SITRANS F US etc.
Zero Inactiv
e
63 F63 - SENSORPROM®
Replace It is not possible to read from the SENSORPROM
®
unit anymore
Active Active
70 F70 - Coil current
Check cables Coil excitation has failed Active Active
71 F71 - Internal error
Replace transmitter Internal convertion error in ASIC Active Active