Procedure
1. Remove the lid from the sensor terminal box.
2. Remove SENSORPROM from the holder in the sensor terminal box. The SENSORPROM has to
be mounted in the transmitter terminal box.
Ensure that the serial number on the SENSORPROM label is identical to the sensor serial
number.
3. The terminal board with premounted terminal blocks is included in the delivery of the wall
mounting unit.
Mount the sensor terminal board in the sensor terminal box. Tighten completely with
maximum torque: 1 Nm.
6(16253520
3+
Connecting
5.2Connecting the sensor
SITRANS FMS500
Operating Instructions, 01/2024, A5E52677520-AA 29
To Next Page
Loading...
