Siemens SITRANS FSS200 - Preliminary Information for FSS200 Sensors; Items Supplied in the Package

Introduction
1.3 Preliminary Information
FSS200 clamp-on sensors
8 Installation Manual, 08/2017, A5E36255466-AC
1.3
Preliminary Information
The following information is specifically for the FSS200 sensors.
Clamp-on ultrasonic flowmeters can accommodate a wide range of fluid flow applications.
These instructions expect that only a technically instructed person will be installing these
flowmeters. Knowledge about process conditions and application parameters are
prerequisite, including knowledge of the functional principles of these flowmeters.
Further information:
Siemens provides special training and other information via the Internet, including helpful
installation videos. Helpful links will be listed inside this manual separately.
1.4
Items supplied
Note
Scope of delivery may vary, depending on version and add
-ons.
Note
Handle with care!
Impact and shock can damage the sensor connector or decouple the piezoelectric crystal
located within the sensor.
•
SITRANS FSS200 sensors with selected
mounting hardware
•
Sensor cables. One pair per sensor.
•
Transmitter (not shown)
•
SITRANS F documentation disk containing
software, certificates and device manuals
•
Mounting hardware