Connecting
5.5 Connecting sensors to transmitter
FSS200 clamp-on sensors
64 Installation Manual, 08/2017, A5E36255466-AC
4. Connect the downstream sensor cable ④ to the transmitter port (1B) and make
connection snug.
Upstream sensor cable (1A) Path 1
Ports for I/O, Communications, RTDs
Downstream sensor cable (1B) Path 1
Figure 5-11 Wall mount housing with transmitter-to- sensor cable connections
5. Tighten all cable glands to obtain optimum sealing.
6. Refer to transmitter FST030 Operating Instructions to program transmitter.
To Next Page
Loading...
