5 START-UP
38
SITRANS FX300
www.siemens.com/flow 06/2009 - SFIDK.PS.050.F2.02 A5E02100423
Start-up
5.1 Start
After the device is switched on, the display shows the following in sequence
1. Testing...
2. Device type
Sofware Version - Revision
The device performs a self-test and switches to measurement mode. Here, all of the parameters
preset for the customer are analysed and checked for plausibility, and the current measured
value is displayed.
5.2 Start-up and control
INFORMATION!
The flowmeter is largely maintenance-free.
Observe the application limits in respect of temperature and medium. Additional information
refer to Technical data on page 67
.
MA_Siemens_Sitrans_FX300_R02_en_PRT.book Page 38 Monday, June 22, 2009 8:17 AM
To Next Page
Loading...
