Page 96 SITRANS LU10 – INSTRUCTION MANUAL 7ML19985AN02
mmmmm
Technical Reference
Maintenance
The SITRANS LU10 should require no maintenance, though good housekeeping practices
in and around the area of the enclosure are recommended.
Wipe out the area of the enclosure lid docking bay recess with a clean dry cloth (if
necessary) before installing the programmer.
Transducer inspection, to verify the effectiveness of the self cleaning design, is
recommended. If material build-up on the transducer face
on the transducer faceon the transducer face
on the transducer face is observed, to maintain
maximum system performance, a schedule of regular cleaning should be adopted.
To Next Page
Loading...
