Siemens SITRANS LUT400 - Page 128

Page 124 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL A5E33701270
mmmmm
Operation - FC375
7 Linearization
1 Characteristic
2 Edit Characteristic
Level <1 to 32>
Volume <1 to 32>
7 Pumps
1 Basic Setup
1 Pump Control Enable
2 Relay Pump 1
3 Relay Pump 2
4 Pump Control Mode
5 ON Setpoint Pump 1
6 OFF Setpoint Pump 1
7 ON Setpoint Pump 2
8 OFF Setpoint Pump 2
9 Serv Ratio Pump 1
Serv Ratio Pump 2
2 Modifiers
1 Wall Cling Reduction
1 Enable
2 Level Setpoint Vari...
2 Energy Savings
1 Enable
2 Peak Lead Time
3 Peak 1 Start Time
4 Peak 1 End Time
5 Peak 2 Start Time
6 Peak 2 End Time
7 Peak 3 Start Time
8 Peak 3 End Time
9 Peak 4 Start Time
Peak 4 End Time
Peak 5 Start Time
Peak 5 End Time
Peak ON Pump 1
Peak OFF Pump 1
Peak ON Pump 2
Peak OFF Pump 2
3 Pump Run-On
1 Enable
2 Run-On Interval
3 Run-On Dur Pump 1
4 Run-On Dur Pump 2
4 Pump Start Delays
1 Pump Start Delay
2 Power Resumption Del...
3 Totalizers
1 Running Total High
2 Running Total Low
3 Totalizer Dec. Pos.
3 Totalizer Multiplier
4 Inflow/Disch. Adj.
8 Alarms
1 Level