Siemens SITRANS LUT400 - Page 129

A5E33701270 COMMUNICATIONS FOR SITRANS LUT400 (HART) – MANUAL Page 125
mmmmm
Operation - FC375
1 High Level Alarm
1 Enable
2 High Level Value On
3 High Level Value Off
4 Assigned Relay
5 Alarm State
2 In-Bounds Level Alarm
1 Enable
2 High Level Value
3 Low Level Value
4 Assigned Relay
5 Alarm State
3 Low Level Alarm
1 Enable
2 Low Level Value On
3 Low Level Value Off
4 Assigned Relay
5 Alarm State
4 Out-of-Bounds Level Alarm
1 Enable
2 High Level Value
3 Low Level Value
4 Assigned Relay
5 Alarm State
2 Alarms
1 Low Temperature Alarm
1 Enable
2 Low Temp. Value On
3 Low Temp. Value Off
4 Assigned Relay
5 Alarm State
2 High Temperature Alarm
1 Enable
2 High Temp. Value...
3 High Temp. Value...
4 Assigned Relay
5 Alarm State
3 Switch (DI) Alarm
1 Enable
2 Discrete Input Num...
3 Discrete Input State
4 Assigned Relay
5 Alarm State
4 Fail-safe Fault Alarm
1 Enable
2 Assigned Relay
3 Alarm State
5 Relay Logic
1 Relay 1 Logic
2 Relay 2 Logic
3 Relay 3 Logic
6 Time to Spill
1 Level to Spill
2 Minutes Left to Spill