Siemens Synova FC330A - Page 27

e1973c-4
02.2004
23
Fire & Security Products
Siemens Building Technologies Group
Zone isolation procedure
1. Press
St
.
 Display shows 
2. Select option 2.  1.  1.
 Display shows 
Now you can disable single zones, a range of
detector zones or all zones as described be-
low:
Disable single zones
1. Enter the desired zone number (e. g.
2).
 Display shows 
2. Press
ok
to disable the single zone.
 Display shows 
3. Enter 99 for permanent disabling.
 Display shows 
or
"
Enter the desired disabling time in full
hours (e. g. 2).
 Display shows 
4. Press
St
to finish the zone disabling
procedure.
or
"
Enter another single zone number to disable.
 Display shows 
 The yellow LED isolation is on.
Disable a range of zones
1. Enter the first zone number of the
range of zones to be disabled (e. g. 2).
 Display shows 
2. Enter the last zone number of the range
of zones to be disabled (e. g. 5).
 Display shows 
3. Enter 99 for permanent disabling.
 Display shows 
or
"
Enter the desired disabling time in full
hours (e. g. 2).
 Display shows 
4. Press
St
to finish the zone disabling
procedure.
or
"
Enter another zone number to disable.
 Display shows 
 The yellow LED isolation is on.
SELECT: 1. ENabling
(main menu) 2. DISabling
3. INFO polling
4. other functions
DISable zones: (range ### to ###)
> zone no.? (555 = all)
hm: back to menu Stop: end operating
zone ### SELECTED. ok = SINGLE zone
> 2nd zone no.? (range ### − ###)
hm: back to menu Stop: end operating
zone ### SELECTED
> hours DISABLED? (99=permanent)
Permanent disabling
zone ### permanent DISABLED
(hm = end) new zone no.?
hm: back to menu Stop: end operating
Disabling for a few
hours
zone ### DISABLED for ## hours
(hm = end) new zone no.?
hm: back to menu Stop: end operating
parts of system DISABLED total:###
WED
21.7.00 15:00
zone ### SELECTED. ok = SINGLE zone
> 2nd zone no.? (range ### − ###) _
hm: back to menu Stop: end operating
zone ### − ### SELECTED
> hours DISABLED? (99=permanent)
hm: back to menu Stop: end operating
Permanent disabling
zones ### − ### permanent DISABLED
(hm = end) new zone no.?
hm: back to menu Stop: end operating
Disabling for a few
hours
zones ### − ### DISABLED for ## hours
(hm = end) new zone no.?
hm: back to menu Stop: end operating
parts of system DISABLED total:###
WED
21.7.00 15:00