Sigicom INFRA C22 - Li-Ion Battery Removal and Replacement

Copyright © Sigicom AB 2021
28
5.7. Removal and replacement of Li-Ion batteries:
•
Remove the front lid using a Torx T20 driver, see
Figure 5.
•
Turn the battery lock lever to one side and remove/replace the
first battery.
•
Turn the battery lock lever to the other side and remove/replace
the second battery.
•
Reset the lock lever in its middle position for the lid to fit.
•
Replace the front lid using a Torx T20 driver.
Figure 5. Instrument with front lid removed