Copyright © Sigicom AB 2021
5.10.3. Remote Shut Down
It is possible to force a shutdown
on an C22 which is “at work”,
monitoring vibrations. This is done by selecting (in INFRA Net –
Hardware tab)
Special commands → Remote Shut Down
followed by
Manage changes → Commit.
The data logger will perform the shutdown at the next communication.
5.10.4. Remote Update GPS Position
GPS position is updated every time Monitoring is started, but it is
possible to remotely call for an update of the GPS position.
Please select (in INFRA Net – Hardware tab)
Special commands → Remote Update GPS Position
followed by
Manage changes → Commit.
The C22 will perform the update at the next communication.
First a controlled “Stop Monitoring” will be performed.
To Next Page
Loading...
Need help?
General