Copyright © Sigicom AB 2021
1.4. Unpacking and Parts Identification
The INFRA C22 Vibration Monitor has been shipped in protective
packaging. Please keep this and use it when transporting your equipment.
Verify the package content with the following list:
• C22 Vibration Monitor instrument.
• Foam (shock protection during transportation).
• Two (2) batteries, either inserted in unit or separate.
Note! Because of shipping regulations, batteries are charged
below 30% state of charge at delivery.
• Calibration document.
Any damage or omission should be reported immediately to Sigicom.
Keep record of the instrument’s serial number. You will be asked to give
this number in any C22 related communication you may have with
Sigicom.
To Next Page
Loading...