Sigicom INFRA C22 - GUI Passcode Protection

Copyright © Sigicom AB 2021
37
5.9. GUI Passcode
To prevent unauthorized access, a passcode (not changeable) can be
activated for the C22 graphical user interface (GUI).
If the passcode is not active, activate it through the menu:
→ Settings and actions → GUI Passcode.
The passcode is then entered on the keypad at start-up.
Use the and keys, followed by .
The default passcode is: “1-2-3”. It can be entered in the following ways:
or
.
If the passcode is active at display start-up, and the passcode is entered
incorrectly (or not entered at all), the C22 GUI will be opened in a ‘view-
only’ mode. All settings and actions (including monitoring start) are
prohibited.
An active passcode may be deactivated in the following way:
→ Settings and actions → GUI Passcode.