Copyright © Sigicom AB 2021
5.8.5. USB Memory Interface Mode
In this mode the files and directories of the SD Memory card can be
accessed, just as a normal USB memory. Select “USB mode” by pressing:
→ Settings and actions → Set USB mode.
Note! To set USB mode, Monitoring must be OFF and
Communication mode set to Flight mode.
1. Connect a USB cable between a PC and the C22 USB connector,
see section 2.5.
2. Press .
3. The microSD memory should now appear as a removable drive
in the file system of the PC.
4. When finished command the PC to eject the removable disc.
5. Disconnect the USB connector from the instrument and it will
reboot automatically.
To Next Page
Loading...