Copyright © Sigicom AB 2021
Appendix C. Safe Handling of Li-Ion Batteries
Preparing your office for safe handling of Li-Ion batteries:
• Separate battery warehouse from the site where charging is
taking place.
• Keep batteries in its original inner packaging or equivalent at the
warehouse. Also, separate batteries from each other to prevent a
burning battery from igniting adjacent batteries.
• Only charge during office hours (use mains timer).
• Make sure that charger is standing firmly at the table and are not
in danger of falling to the floor during charging.
• Have foam extinguisher, CO2 or ABC dry chemical available on
sites where batteries are handled regularly.
• Have fire alarms on sites where batteries are handled regularly.
• Have a metallic bucket half filled with sand available to put
batteries into in case of a burning battery.
• Interpret the "In case of Li-Ion battery fire" instruction example
into all local languages used in the office.
• Place the safety instruction easily seen in all sites where batteries
are handled.
• Inform personnel about the instruction.
• Report all safety related events to management.
Reference:
http://batteryuniversity.com/learn/article/safety_concerns_with_li_ion
To Next Page
Loading...
Need help?
General