Sigicom INFRA C22 - Remote Firmware Upgrade; Remote Reboot Functionality

Copyright © Sigicom AB 2021
39
5.10.1. Remote Firmware Upgrade
It is possible to upgrade FW also on a C22 which is “at work”, monitoring
vibrations. This is done by selecting (in INFRA Net – Hardware tab)
Special commands → Remote Firmware Upgrade
And then
Manage changes → Commit.
The C22 will download the new firmware at the next communication
8
,
and the upgrade will be performed sometime between 3 a.m. and 5 a.m.
(local instrument time).
5.10.2. Remote Reboot
It is possible to force a reboot (=restart) on an C22 which is “at work”,
monitoring vibrations. This is done by selecting (in INFRA Net –
Hardware tab)
Special commands → Remote Reboot
followed by
Manage changes → Commit.
The data logger will perform the reboot at the next communication.
8
It may take several minutes until the firmware files have been
downloaded.