Name: SIGLENT TECHNOLOGIES SDG1032X
Brand: SIGLENT TECHNOLOGIES
Rating: 4 (1 reviews)

To Next Page

To Previous Page

32 SDG1000 Service Manual

Removing steps:

1. Remove the two screws from the rear cabinet of the generator using a PH2

philips screw driver.

2. Remove the screw from the bottom of the generator using the screw driver.

3. Remove the rear cabinet and metal shell from the main body.

To install the metal shell and rear cabinet, please operate as the reverse steps.

Table 4-5 Disassembled into three parts

Questions and Answers:

Need help?

Do you have a question about the SIGLENT TECHNOLOGIES SDG1032X and is the answer not in the manual?

SIGLENT TECHNOLOGIES SDG1032X Specifications

General