SDG1000 Service Manual VII
SDG1000 Series at a Glance
The SDG1000 series is a direct digital synthesized waveform generator with
built-in arbitrary waveform and pulse capabilities. Its combination of excellent
system features, easiness in usage and versatile functions makes this
generator a perfect solution for your testing now and in the future.
Characteristics
⚫ DDS technology provides precise, stable and low distortional output signal.
⚫ 3.5’TFT color LCD display.
⚫ 125MSa/s sampling rate, 14-bit resolution.
⚫ Frequency characteristics:
Sine: 1μHz to 50 MHz
Square: 1μHz to 25 MHz
Ramp: 1μHz to 300 kHz
Pulse: 500μHz to 10MHz
White Noise: 50MHz bandwidth (-3dB)
Arbitrary: 1μHz to 5MHz
⚫ 5 standard waveforms: Sine, Square, Ramp, Pulse, Noise
⚫ Self-defined arbitrary waveform
⚫ Multiple modulation function, various modulated waveform: AM, DSB-AM,
FM, PM, ASK, FSK, Sweep and Burst.
⚫ Multiple I/O: external modulation source, external 10 MHz reference input,
external trigger source, waveform output, synchronous signal output.
⚫ Support USB storage device. Software updating could also be performed
using USB devices.
⚫ Up to 16k sample points of internal waveform depth, which can rebuild or
simulate any complex waveform.
⚫ Remote control is realized using the USB cable.
⚫ Multiple interfaces: USB host & device
⚫ Support the seamless connection with SIGLENT Series Digital
Oscilloscopes; Be able to directly read and rebuild the stored waveform in
the oscilloscopes.
⚫ 2 languages（English and Chinese）user interface and built-in help system.
Note: All the specifications described in this manual are according to
SDG1050.
To Next Page
Loading...
Need help?
General
