SDG1000 Service Manual V
Overview for the Document
The document is for SDG1000 series arbitrary waveform generator, which will
be mostly written as generator for short in the following text. The main contents
described in this manual are:
SDG1000 Series Generator at a glance
This part introduces the main technology characteristics for SDG1000
generator.
The Front Panel at a glance
This part introduces briefly all the buttons and the knob on the front panel.
The Rear Panel at a glance
This part introduces all the ports for easy communication on the rear panel.
Specification
Chapter 1 lists the generator’s specifications.
Quick Start
Chapter 2 prepares the generator for use and helps you get familiar with a few
of its front-panel features.
Performance Verification Test
Chapter 3 provides performance verification test for the generator.
Assembly Procedures
Chapter 4 provides disassembly procedures for you to get an understanding of
the structure of the generator, thus to install or replace some needed modules,
or troubleshoot faults you encounter while operating it.
Troubleshooting
Chapter 5 provides troubleshooting procedures for the internal main board and
power supply board, as well as the quick guide for general troubles. Before any
operation, you should read the ESD Precautions to avoid personal injuries or
damages to the generator
Maintainance
Chapter 6 provides information on maintenance, daily care and unpacking
inspection of the instrument. The contact information is attached in the end in
case of some unsolvable troubles you encounter.
To Next Page
Loading...
Need help?
General
