SIGLENT
SDG2000X User Manual 121
2) When the frequency of the waveform is greater than 10MHz, there is no
sync signal output.
3) Noise and DC: there is no sync signal output.
Modulated Waveform
1) When internal modulation is selected, the sync signal is a Pulse with 50ns
pulse width.
For AM, FM, PM and PWM, the frequency of the sync signal is the
modulating frequency.
For ASK, FSK and PSK, the frequency of the sync signal is the key
frequency.
2) When external modulation is selected, there is no sync signal output, for
the [Aux In/Out] connector on the rear panel is used to input external
modulating signal.
Sweep and Burst Waveform
When Sweep or Burst function is turned on, there is no sync signal output and
the Sync menu is hidden.
To Next Page
Loading...
Need help?
General
