SIGLENT
120 SDG2000X User Manual
your network administrator to get an available IP address. For details,
refer to the TCP/IP protocol.
4) DHCP Configuration Mode
In DHCP mode, the DHCP server in the current network assigns LAN
parameters, e.g. IP address, for the generator. Press DHCP to select “On” or
“Off” to turn DHCP mode on or off. The default is “Off”.
3. Communicate with PC remotely
Open Measurement & Automation Explorer of NI. After adding the LAN device
(VISA TCP/IP Resource…) successfully, choose the corresponding resource
name. Then click “Open VISA Test Panel” to turn on the remote command
control panel through which you can send commands and read data.
To Next Page
Loading...
