Pos: 37 /100 Sig ma/100 BA Zentrif ugen Sigma (S tandardmod ule)/030 Sicherheit /030-0030 Verantwortung des Betreibers @ 26\mod_1 405319015364 _68.docx @ 19 1961 @ 2 @ 1
3.3 Responsibility of the operator
The operator is responsible for authorising only qualified personnel to work
on the centrifuge (see chapter 3.4 - "Operating personnel").
The areas of responsibility of the personnel concerning the operation,
maintenance, and care of the unit must be clearly defined.
The safety-conscious work of the personnel in compliance with the
operating manual and the relevant EC and national health and safety
regulations as well as with the accident prevention regulations must be
checked at regular intervals (e.g. every month).
Under the international rules for health and safety at work, the operator is
obliged to:
• take measures in order to prevent all danger to life or health during
work.
• ensure that centrifuges are operated properly and entirely as intended
(see chapter 1.2 - "Intended use").
• take protective measures against fire and explosion when working with
hazardous substances.
• take measures for the safe opening of centrifuges.
Pos: 38 /010 Uni versalmodule/ Leerzeile @ 0\mod_120 2116244500_ 0.docx @ 114 @ @ 1
Pos: 39 /100 Sig ma/100 BA Zentrif ugen Sigma (S tandard module)/030 Sicher heit/030-0040 Bedienperson al @ 26\mod_1 40531901763 4_68.docx @ 1 91989 @ 2 @ 1
3.4 Operating personnel
Persons operating the unit must
• be familiar with the fundamental regulations concerning workplace
safety and accident prevention
• have read and understood this operating manual (and in particular the
safety sections and warning notes) and confirmed this with their
signature.
Pos: 40 /010 Uni versalmodule/ Leerzeile @ 0\mod_120 2116244500_ 0.docx @ 114 @ @ 1
Pos: 41 /100 Sig ma/100 BA Zentrif ugen Sigma (S tandardmod ule)/030 Sicherheit /030-0050 Informelle Sich erheitshinweise @ 26\mod_ 14053190199 66_68.docx @ 192 017 @ 2 @ 1
3.5 Informal safety instructions
• This operating manual is a part of the product.
• The operating manual must be kept at the location of use of the
centrifuge. Ensure that it is accessible at all times.
• The operating manual must be handed over to any subsequent owner
or operator of the centrifuge.
• Any changes made must be added to the operating manual.
• In addition to the operating manual, the general and local rules and
regulations concerning the prevention of accidents and the protection of
the environment must also be supplied.
• Safety and danger indications on the centrifuge must be kept readable
at all times. If necessary, they must be replaced.
Pos: 42 /010 Uni versalmodule/S eitenwechsel @ 0\mod_120 2116244312_0. docx @ 105 @ @ 1
To Next Page
Loading...
