Sigma 1-14 - Translation of the Original Operating Manual, Part no

Laboratory centrifuge Sigma 1-14
Index
Version 08/2012, Rev. 3.14 of 11/08/2017 • sb
65 / 67
Translation of the original operating manual, part no. 0700002
Error correction .......................................... 35
Error messages ......................................... 35
Explanation of the symbols and notes ........ 16
Explosive substances ................................ 19
F
Fatal error .................................................. 35
Fire preventions ......................................... 19
Form for the return of defective parts ......... 45
Functional and operating elements ............ 11
G
General conditions ....................................... 9
General malfunctions ................................. 35
Glass breakage .......................................... 42
Glass particles ........................................... 42
Gravitational field ................................. 28, 48
Grease for load bearing bolts ..................... 39
H
Hazard warnings .............................. 9, 27, 29
Height ........................................................ 48
Highly corrosive substances ...................... 18
I
Imbalance .................................................. 29
Imbalance error .......................................... 37
Importance of the operating manual ............. 9
Important information ................................. 16
Infectious substances ................................ 42
Inflammable substances ............................ 19
Informal safety instructions ........................ 17
Initial start-up ............................................. 26
Input fuse ................................................... 12
Inspection by the manufacturer .................. 44
Installation of accessories .......................... 29
Installation of rotors and accessories ......... 26
Installation of the microhaematocrit rotor ... 28
Installation of the rotor ............................... 26
Installation site ........................................... 25
Intended use ................................................ 9
Interrupting a centrifugation run ................. 31
Interrupting a deceleration process ............ 31
IP code ...................................................... 48
K
Kinetic energy ............................................ 12
L
Layout of the centrifuge.............................. 11
Leaks ......................................................... 43
Lid error ..................................................... 37
Lid is not closed correctly ........................... 35
Lid lock device ........................................... 22
Lid lock is not closed correctly.................... 35
M
Mains power switch off ............................... 35
Mains voltage ............................................. 18
Maintenance .............................................. 39
Malfunction ................................................ 35
Malfunctions and error correction ............... 35
Manufacturer .............................................. 48
Marking of the unit ..................................... 15
Max. capacity ............................................. 48
Max. current consumption .......................... 48
Max. gravitational field ............................... 48
Max. speed ................................................ 48
Measures in the event of hazards and
accidents ................................................ 22
Mechanical safety ...................................... 18
Microhaematocrit rotor ......................... 28, 41
Mode of operation ...................................... 13
Motor error ................................................. 37
Motor shaft ..................................... 27, 28, 39
N
Name plate ................................................ 12
No indication on the display ....................... 35
No power in the mains supply .................... 35
Noise level ................................................. 48
Nominal voltage ......................................... 12
Notes on safety and hazards ....................... 9
Notes on transport ..................................... 23
O
Online download of forms .......................... 46
Opening the lid ........................................... 26
Operating personnel .................................. 17
Operating voltage....................................... 25
Operational safety ...................................... 40
Overseas shipping ..................................... 23
P
Packaging .................................................. 24