Sigma SD1 Merrill - Reset to the Defaults

114
RESET TO THE DEFAULTS
It is possible to reset the settings to the defaults.
1
Press the button to select [Camera reset] in [ Camera Settings]
(P. 2 8 ).
2
Use the
or
button to display a confirmation dialog.
3
Press
to reset the settings to default or
to close the confirmation dialog without
resetting.
z
The following settings are not reset by the above steps.
• Language setting
• Custom mode setting
• AF Micro Adjustment setting
If you want to reset all the camera settings, including those listed above, you will
have to reset the camera to factory defaults. When displaying the confirmation
dialog in step
2 , press to show the message [Reset all camera settings to
factory defaults?].
Press
to reset all camera settings to
factory defaults or to close the confirmation
dialog without resetting.