63
SELF TIMER
When you want to include yourself in the picture or avoid camera shake,
please use the self-timer.
When you set the self-timer to 10s, then the shutter will be released 10seconds
after you fully press the shutter button.
When you set the self-timer to 2s, then the shutter will be released 2seconds
after you fully press the shutter button.
After composing the picture, press the shutter button halfway and adjust the
focusing. Then, press the shutter button the rest of the way and the self–timer will
activate.
z If [Timer sound] in [
Camera Settings] (P. 2 8 ) is set to [On], an electric
beep will sound during the self-timer operation. If you would like to cancel
lectronic the beeping sound, please set it to [Off].
z If you want to cancel the self-timer operation, turn the D-dial to another
position.
z When you start the self-timer and do not look through the viewfinder, attach the
finder cap to the viewfinder eyepiece to prevent light entering (P. 1 8).
MIRROR LOCK-UP
If you want to reduce the camera’s vibration such as during Macro
Photography or when using long telephoto lenses, use the Mirror Lock-up
function.
1
Set the D-dial to the “UP” position. When you press the shutter button halfway
the camera will set the focus and exposure. As you press the shutter button
further, the mirror will move up and the exposure value will be memorized.
2
Remove your finger from the shutter button and then press it halfway to release
the shutter.
Mirror lock-up function can be cancelled manually by turning the D-dial away
from the “UP” position.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
