EasyManuals Logo

Sigma SD1 Merrill User Manual

Sigma SD1 Merrill
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
75
FLASH EXPOSURE COMPENSATION
It is possible to compensate the flash
output level without changing the
background’s exposure.
While pressing the button, turn the A-dial
(
) or S-dial ( ) to set the compensation
amount.
z
mark and 0.0” will be displayed in the
color LCD monitor and viewfinder display
when you initially press the
button.
“+” indicates over exposure “
-
indicates
underexposure.
z Exposure compensation can then be set in 1/3 increments from +3.0 to –3.0
stops.
z
mark will be displayed on the viewfinder display after setting the
compensation amount has been set. The compensation amount will not be
displayed. The exposure amount can be confirmed by pressing the
button.
z It is possible to use the camera for flash exposure compensation of the
external flashgun. If the setting is done by both camera and flashgun, then the
camera’s setting will have priority over the flash’s setting.
WARNING!!
Once you set the flash Exposure Compensation, the camera will continuously
hold this mode, until the compensation amount is reset to 0.0 value.
Combination of Exposure Compensation and Flash Exposure Compensation
It is possible to make adjustments by using the exposure compensation together
with the flash exposure compensation, such as making the background brighter
and preventing unwanted flash reflections from the subject.
For instance, set the exposure compensation to +2 and the flash exposure
compensation to –2, and the background exposure will be 2 stops over exposed
and the flash exposure be 0 (appropriate).
z If exposure compensation and flash exposure compensation are set,
will
be displayed in the viewfinder display, only the exposure compensation amount
will be displayed.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sigma SD1 Merrill and is the answer not in the manual?

Sigma SD1 Merrill Specifications

General IconGeneral
Megapixel46 MP
Camera typeSLR Camera Body
Sensor typeCMOS
Image stabilizer-
Total megapixels48 MP
Image sensor size- \
Image formats supportedJPG, RAW
Supported aspect ratios3:2
Maximum image resolution4704 x 3136 pixels
Image sensor size (W x H)23.5 x 15.7 mm
Still image resolution(s)4704 x 3136, 3264 x 2176, 2336 x 1568
Optical zoom- x
FocusTTL
Auto focusing (AF) modesContinuous Auto Focus, Single Auto Focus
Normal focusing range (tele)- m
Light meteringCentre-weighted, Evaluative (Multi-pattern), Spot
ISO sensitivity100, 200, 400, 800, 1600, 3200, 6400
Light exposure modesAperture priority AE, Manual, Shutter priority AE
ISO sensitivity (max)6400
ISO sensitivity (min)100
Light exposure controlProgram AE
Light exposure correction± 3EV (1/3EV step)
Camera shutter typeElectronic
Fastest camera shutter speed1/8000 s
Slowest camera shutter speed30 s
External flash connectorYes
Maximum video resolution- pixels
Memory slots1
Compatible memory cardsCF
Flip-out screenNo
Display diagonal3 \
Display resolution (numeric)460000 pixels
Magnification0.95 x
USB version2.0
Photo effectsBlack&White, Neutral, Sepia, Vivid
White balanceAuto, Custom modes, Flash, Fluorescent, Incandescent, Shade, Sunny
Power source typeBattery
Product colorBlack
Cables includedAV, USB
Bundled softwareSIGMA Photo Pro
Weight and Dimensions IconWeight and Dimensions
Depth80 mm
Width145.5 mm
Height113.5 mm
Weight700 g

Related product manuals