27
SETTING THE TIME AND DATE
The SD1 Merrill camera records the date and time when each image is
captured and stores this information with the image. To ensure that the
correct information is recorded with each image, set the camera’s internal
clock to the correct date and time before using the camera for the first time
or after extended periods of disuse.
1
Make sure the camera is turned on.
2
Press the button on the back of the
camera to display the Camera Set-up Menu.
(See P. 2 8 )
3
Select [ Camera Settings (3)] by rotating
the S-dial (
).
4
Use the buttons or rotate the A-dial ( )
to select [Date/Time].
5
Press the or button to open the
date/time set-up page.
6
Use the buttons to select a setting and
use the
buttons to cycle through the
setting options.
7
Once all changes have been made, press
to save the settings and return to the
main menu.
Press
at any time to close the date/time
set-up
page
without
saving
any
of
the
changes.
TIP
• The date can be displayed in one of three formats: M/D/Y (month/day/year),
D/M/Y (day/month/year), or Y/M/D (year/month/day). Select the desired format
from “Date Format”.
• The camera’s internal clock is powered by a capacitor that receives its charge
from the camera’s battery. If the camera is left without a battery for an
extended period of time, such as after prolonged storage, the internal clock will
need to be reset.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
