EasyManua.ls Logo

Sigma SD1 Merrill - Warning Displays

Sigma SD1 Merrill
128 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
122
WARNING DISPLAYS
COLOR LCD MONITOR MESSAGES
“No Memory Card”
Please Insert the card. (P.39)
“Card Error”
Format card. If the error persists, replace with new card. (P. 41 )
The card may be damaged.
“Card Full”
Delete unwanted photos, choose a lower resolution setting, or use a
different card. (P. 3 9- 40 ) (P.96-97)
“No images on Memory card”
To review images, insert a card with valid SD1 Merrill images, capture new
images onto the card, or press
button again to turn off display.
“Cannot preview this image”
It may have been taken by another camera or the image data may have
collapsed.
“Cannot magnify this image”
It may have been taken by another camera or the image data may have
collapsed.
“Cannot save this image!”
The card may be damaged. Please transfer the data to another hardware
such as a PC and then format the card in the PC. If the same message is
displayed, the card may have collapsed. Please use a new card.
An error has occurred! Error code # # #.
Turn the camera off and back on. If the problem persists, call Technical
Support and give them the error number.

Table of Contents

Related product manuals