Operating manual - English DUO
Copyright Silca 2 010 5
1 TRANSPORT
The DUO key-cutting machine is easily transported and is not dangerous to handle. The packed ma-
chine can be carried by one person.
1.1
Packing
The DUO is packed in a strong cardboard box, the dimensions of which are shown in fig. 4, sufficiently
robust to be used for storing the machine for long periods.
Inside the box the machine is enclosed in two expanded polymer shells. The shells and cardboard box
ensure safe transportation and protect the machine and all its parts.
Fig. 4
1.2
Transport
To avoid damaging the DUO it must always be transported in its packing case. This will prevent sudden
movements or rough handling from damaging the machine, persons or things.
1.3
Unpacking
To remove the machine from the packing box:
1) cut the straps with scissors and remove,
2) prise off the staples,
3) open the box without damaging it as it may be used again (e.g. removals, dispatch to the manufac-
turers for repairs or servicing),
4) check the contents of the box, which should comprise:
- 1 DUO key-cutting machine packed in a protective shell;
- 1 set of documents, including: operating manual, spare parts list and guarantee;
- 1 connecting wire;
- 1 tool kit
5) remove the key-cutting machine from the protective shell.
1.4
Handling the machine
When the DUO has been unpacked, place it directly on its workbench.
This operation can be carried out by one person, firmly holding the base, and no other part, to lift and
carry the machine.
500
596
350
Keep dry This side up
Handle with care
To Next Page
Loading...
