Silca Unocode 399 Plus - Page 34

Unocode 399 PLUS Operating manual - English
30 Copyright S ilca 2010
g) Electric Contact
FUNCTION NOT AVAILABLE ON THIS
MACHINE
h) Key Blank Measurement
Function used to edit the key blank measurement.
The key blank figure in the database refers to a key produced by Silca.
Figura 27
1) Press F3 to vary the set measurement for the key blank to be cut.
2) Enter the required measurement and press ENTER to save.
3) Press STOP to quit.
F2
Key Blank
measurement
F3