Silca Unocode 399 Plus - 7.7 KEYBOARD;DISPLAY REPLACEMENT

Operating manual - English Unocode 399 PLUS
Copyright S ilca 2010 69
7.7 KEYBOARD/DISPLAY REPLACEMENT
1) turn the machine off and unplug it from its power
supply cable.
2) loosen the 4 scr ews ( W4) and r emove the
support (W3).
3) remove the display’s support, by unscrewing the
2 (B1) fixing screws (fig. 53 and fig. 54).
4) detach the flat cable and ground wire from the
keyboard (fig. 55).
5) unscrew the keyboard’s fixing nuts and remove
the keyboard from its support.
6) fit the new keyb oard/display, repeating the
operations described above, backwards.
Fig. 52
Fig. 53
Fig. 54
Fig. 55
W4
W3
B1