Silca Unocode 399 Plus - 7.8 ACCESS TO BACK COMPARTMENT; 7.9 ACCESS TO BOTTOM COMPARTMENT

Unocode 399 PLUS Operating manual - English
70 Copyright S ilca 2010
7.8 ACCESS TO BACK COMPARTMENT
To gain a ccess to the back c ompartment,
proceed as follows
:
1) turn the machine off and unplug it from its
power supply cable.
2) remove the vacuum system’s connector (U2)
(fig. 7.9).
3) unscrew the 6 (M1) scre ws that secu re the
back panel (fig. 7.9) thus removing it.
Fig. 56
7.9 ACCESS TO BOTTOM COMPARTMENT
To gain access to the bottom compartment, proceed as follows :
1) turn the machine off and unplug it from its power supply cable.
2) remove the vacuum system’s connector (U2) (fig. 7.9).
3) turn the machine on its back side.
4) remove the machine’s bottom panel by unscrewing the 8 (L1) screws.
Fig. 57
M1
U2
L1