Operating manual - English UNOCODE PRO
Copyright Silca 2017 7
1.4 TECHNICAL DATA
Electricity supply:
230V-50Hz
100V-50/60Hz
Nominal power:
230V: 1,1 Amp. 210 Watt
100V: 3,5 Amp. 310 Watt
Cutter motor:
single phase and speed
Cutter:
hard metal, coated
Tool speed
:
Unocode PRO: 50Hz: 1700 rpm (+/- 10%) 60Hz: 2040 rpm
Unocode PRO Flat Steel: 50Hz: 2340 rpm (+/- 10%) 60Hz: 2800 rpm
Movements:
on 2 axes with ball screws activated by step motors, on rectified roller guides.
Possibility to add a 3rd axis to activate the optional tilting and rotating clamps.
Clamp:
universal 4 sided clamp to grip flat, car and cruciform keys
Runs:
X axis: 57 mm Y axis: 32 mm
Dimensions:
width: 450 mm depth: 600 mm height: 440 mm (with raised shield 680 mm)
Mass:
Kg. 38
Noise level:
sound pressure Lp(A) = 80 dB(A) (cutting iron keys)
77 dB(A) (cutting brass keys)
To Next Page
Loading...
