Operating manual - English UNOCODE PRO
Copyright Silca 2017 9
2 TRANSPORT
The key-cutting machine is easily transported and is not dangerous to handle.
The packed machine should be carried by at least two people.
2.1 PACKING
The packing for UNOCODE PRO is designed to ensure safe transportation and to protect the machine and all its parts.
It comprises a pallet base (b) to which the machine is attached, and a cardboard box as a cover (a).
The machine is fixed to the base of the pallet with screwed down brackets that hold it firm into place. This prevents the
machine and its protective shield from any damage.
The closed packing is held in place by two straps which hold the cardboard box firmly on the pallet.
Symbols are printed on the outside of the cardboard box to give instructions and warnings for transportation.
Fig. 7
To prevent any damage to the machine it is advisable to save and use the brackets provided for future transportation
.
Keep dry
This side up
Handle with care
Use no hooks
To Next Page
Loading...
