Silca Unocode PRO - Machine Setup and Operation; Clamp Usage and Electric Contact Cutting

UNOCODE PRO Operating manual - English
12 Copyright Silca 2017
4 “SET UP” AND USE OF THE MACHINE
4.1 USE OF THE CLAMP
Fig. 10
The four-sided clamp ensures excellent grip on the keys placed on their back or profile sides (fig. 11).
• Keys with 1 or 2 cuts to reproduce by code should be fitted mainly on the A and/or B side of the clamp.
• When copying with the optical reader the key can be fitted to any side (A, B, C or D) of the clamp.
- For keys to be cut by code the side of the clamp
on which to place the key is shown on the
machines display.
- For keys to be copied with the optical reader the
side of the clamp to be used is at the discretion
of the operator.
-
To fit keys with tip stops on the optic reader
clamp, fit the bar provided into the special
grooves (fig. 12).
Fig. 11
Fig. 12 - key stops
Clamp - cutter side Clamp - Optic Reader side
V100 R100
1
2
3
4
2
3
1
4
2
C
4
3
2
3
4
1
4
D
B
A
2
1
1
3
D side
C side
B side
A side
1
2
3
4
0
B
4
3
1
C
D
4
3
1
A
4
3
2
1
6