Silca Unocode PRO - Reference Guide

Operating manual - English UNOCODE PRO
Copyright Silca 2017 1
REFERENCE GUIDE
This manual has been produced to serve as a guide for users of the UNOCODE PRO electronic key-cutting machine.
Read it carefully; it is essential if you wish to operate your machine safely and efficiently.
C ONSULTATION
The contents of the manual are divided into sections relating to:
T ECHNICAL TERMS
Common technical terms are used in this manual.
To assist those with little experience of keys and key-cutting, below is an illustration of the terms most frequently used.
Fig. 1
1) Head
2) Rim
3) Stop
4) Stem
5) Tip
6) Back
7) Cuts
Machine description Chapter
1
Transport and installation Chapters 2-3
Regulation and use Chapters 4-5-6
Maintenance Chapters 7-8-9
2
1
5
3
6
4
1
3
7
5
7
2