Operating manual - English UNOCODE PRO
Copyright Silca 2017 65
6.12 ENABLING
From the screen, press MENU and/or F4 to enable the function.
This display shows all the protected systems enabled and allows them to be protected again, if necessary.
E.g.:
In this case a single protected card has been previously enabled.
As explained on the display, use the arrow keys (up and down) to
select the enabled protected system. Press F1 to make it protected
again.
The display shows a further message requiring confirmation of
removal. Press STOP to quit the operation without making alterations,
press F1 to protect the selected card.
the display will show:
To Next Page
Loading...
