Silca Unocode PRO - Accessories Provided

UNOCODE PRO Operating manual - English
8 Copyright Silca 2017
1.5 ACCESSORIES PROVIDED
UNOCODE PRO comes with a set of accessories for its operation and maintenance (tools, hex wrenches, fuses)
supplied in a special tool kit comprising:
tool kit 10 mm spanner Z1 template
(regulating disk)
tip stop bar with notch 13 mm spanner Z20 setting template
tip stop bar 2 Amp fuse - delayed Z3 template
(regulating key)
cutter release rod (230V-50Hz)
4 Amp fuse - rapid
(100V-50/60Hz)
5 Amp fuse - rapid
Z4 serial test connector
1,5 mm allen key
2 mm allen key
2,5 mm allen key
3 mm allen key
4 mm allen key
5 mm allen key
6 mm allen key
10 Amp fuse - delayed belt tension plate
4 Amp fuse - delayed anti-tilting device
6,3 Amp fuse - delayed ø 1,7 mm
steel pin
19 mm
socket wrench
ø 1,2 mm
steel pin
slanted brush serial cable 9/9
laser warning label USB cable
Adhesive label to attach to safety shield