Operating manual - English UNOCODE PRO
Copyright Silca 2017 3
• Machine identification
The machine is provided with an identification label which includes the machine’s serial number (fig. 3).
Fig. 3
(*) see Ch.9 "DISPOSAL", page 86.
GRAPHICS ON THE UNOCODE PRO KEY-CUTTING MACHINE
Do not clean with
compressed air
Obligation to read
the manual
Obligatory use
of safety goggles
Symbol on
UTP versions
Adhesive label Mass - RPM
Unocode PRO
Adhesive label Mass - RPM
Unocode PRO Flat Steel
Laser warning labels
(Ch. 1.2)
Warning label
“DANGEROUS MOBILE PARTS”
(Ch.1.5 "Accessories provided")
Place the adhesive label in the
appropriate language in position
as shown.
To Next Page
Loading...
