–
User manual
•
Text Overlay
–
This section allows you to add text overlays to encoded video streams.
Note that these strings will be embedded into the images streamed out of the device.
See section 4.4 for more details on this feature.
•
Motion Detection
–
This section allows you to configure motion detection regions of
interest. Most VMS platforms will control motion detection parameters and thus would
not require setting anything within the web interface. For more details on configuring
motion detection, see section 4.5.
•
Privacy Zones
–
This section allows you to configure up to 16 privacy zones.
•
JPEG Upload
–
This section allows you to configure JPEG Upload functionality. See
section 4.6 for more details.
Note: When the video input is configured in 1080p25/30, the device will only support 2 en-
coders (Primary H264 and either Secondary H264 or MJPEG). Since the thumbnail
images displayed in the web GUI are from the MJPEG encoder, none can be dis-
played when the secondary encoder is set to H264. The image will
read “Video Input
JPEG not configured”
.
To Next Page
Loading...
